Document Library

Please click on links below to be directed to the Product Data Sheets and Safety Data Sheets of the products we use on our coating systems and all products can be purchased at  www.sydneyindustrialcoatings.com.au

Sikafloor® -550 PA

Abrasion and UV Resistant Polyaspartic Resin Coating

DESCRIPTION
Sikafloor®-550 PA is a clear and pigmented 2-component polyaspartic technology with a high solids, low viscosity, high strength, fast cure, UV and abrasion resistant resin coating.
USES
Sikafloor®-550 PA may only be used by experienced
professionals.
Sikafloor®-550 PA is used in:
▪ Automotive workshops
▪ Clean rooms
▪ Amenities areas
▪ Educational trade facilities
▪ General commercial premises

CHARACTERISTICS / ADVANTAGES
▪ Finish coat for Sikafloor floor coating systems
▪ Totally UV stable
▪ Low VOC
▪ Excellent chemical / abrasion resistance
▪ Fast cure turn around time

https://aus.sika.com/content/dam/dms/au01/p/sikafloor-550-pa.pdf

Sikadur® -31 CF Normal

2-Component Thixotropic Epoxy Adhesive

Uses:

As a structural adhesive for:

• Concrete elements
• Hard natural stone
• Ceramics, fibre cement
• Mortar, Bricks, Masonry
• Steel, Iron, Aluminium
• Wood
• Polyester, Epoxy
• Glass

As a repair mortar and adhesive:

• Corners and edges
• Hole and void filling
• Vertical and overhead use

As a joint filler and crack sealer:

• Joint and crack arris / edge repair

Sikadur 31 CF Normal Technical Data Sheet (TDS) 
Sikadur 31 CF Normal Safety Data Sheet (SDS) - PART A 
Sikadur 31 CF Normal Safety Data Sheet (SDS) - PART B

Sikadur® -31 Normal

Thixotropic Epoxy Adhesive Mortar

Uses:

As a thin layer levelling mortar, repair mortar or general structural adhesive:  

• Most building materials
• Concrete, brick, stone, ceramics
• Cement
• GRC
• Iron and steel

As an anchor:

• To hold down bolts and starter bars

As a bonding agent:

• To create a bridge between old concrete and Sikadur 41 mortar
• In external reinforcemenet

Sikadur 31 Normal Technical Data Sheet (TDS) 
Sikadur 31 Normal Safety Data Sheet (SDS) - PART A 
Sikadur 31 Normal Safety Data Sheet (SDS) - PART B

Sikadur® -33

High Modulus, High-Strength, Structural, Rapid Curing Epoxy, Smooth-Paste Adhesive

Uses:

As a structural adhesive for:

• Concrete elements
• Hard natural stone
• Ceramics, fibre cement
• Mortar, Bricks, Blocks, Masonry, render etc.
• Steel, Iron, Aluminium
• Wood
• Polyester, Epoxy

For concrete repairs

• Corners and edges
• Hole and void filling
• Joint arrises

Technical Data Sheet (TDS) 
Sikadur 33 Safety Data Sheet (SDS) - PART A 
Sikadur 33 Safety Data Sheet (SDS) - PART B

Sikafloor® -94

Low Viscosity, Solvent-Free Epoxy Primer and General Epoxy Binder

Uses:

As a primer, penetrating sealer and bonding agent on:

• Concrete, mortar stone.
• Cement renderings, asbestos cement.
• Timber.

As a bonding agent for:

• Epoxy mortar screeds.
• Epoxy self-levelling floor toppings.

Sikafloor 94 Technical Data Sheet (TDS) 
Sikafloor 94 Safety Data Sheet (SDS) - PART A 
Sikafloor 94 Safety Data Sheet (SDS) - PART B

Sikafloor® -263 SL/264

Solvent Free, Coloured, Universal Epoxy Resin Based Flooring System

Uses:

• Food processing industry
• Chemical/pharmaceutical industry
• Power stations
• Plastics industry
• Laboratories and rooms subject to radiation
• Clean rooms, exhibition halls and showrooms
• Demonstration areas and training rooms
• Washrooms, cloakrooms

For use on mineral-based substrates such as:

• Concrete
• Mortar
• Stone
• Epoxy Modified Mortars (EpoCem)

Sikafloor 263SL/264 Technical Data Sheet (TDS) 
Sikafloor 264/263SL  Safety Data Sheet (SDS) - PART A 
Sikafloor 264/263SL/160 /169 Safety Data Sheet (SDS) - PART B

Sikaflex®-11FC

1-part elastic joint sealant and multipurpose adhesive

Uses:

As an elastic adhesive for:

• Assembling metal framed buildings.
• Cover plates and covings.
• Light-weight construction materials.
• Acoustic ceiling tiles.
• Wood, metal or plastic window and door frames.
• Floor mouldings and door sills.

As an elastic joint sealant for:

• Sealing joints in concrete, epoxy, stone and quarry tiled floors.
• Sealing joints in roofing and guttering etc.
• Flexible draught proofing.
• Containers, water tanks and silos.
• Excellent pick resistance for applications in shop fronts, prisons, schools, public amenities and buildings.
• Bolted lap joints.
• Sealing penetrations in walls or floors for ducts, piping, etc.
• Sanitary purposes.

Sikaflex 11FC Technical Data Sheet (TDS) 
Sikafloor 11FC Safety Data Sheet (SDS)

Sikafloor® -160

2-part solvent free epoxy primer & binder, modular Sikafloor® system

Uses:

• For priming concrete substrates, cement screeds and epoxy mortars
• For normal to strongly absorbent surfaces
• Primer for all Sika Epoxy floorings
• Binder for levelling mortars and mortar screeds

Sikafloor 160 Technical Data Sheet (TDS) 
Sikafloor 160 Safety Data Sheet (SDS) - PART A 
Sikafloor 160 Safety Data Sheet (SDS) - PART B

Sikafloor® - Duraseal

A one component penetrating non-yellowing protective sealer for concrete floors.

Uses:

Sikafloor Duraseal is used as a penetrating dustproof sealer for areas such as:

• Warehouses and storage facilities.
• Car parks and garages.
• Light industrial buildings.

Sikafloor Duraseal Technical Data Sheet (TDS) 
Sikafloor Duraseal Safety Data Sheet (SDS) 

Sikafloor® -PU

UV Stabalised clear polyurethane coating

Uses:

• Interior and exterior seamless floors
• Wear layer over deck coatings and nonslip coatings
• Concrete sealer and top coat
• Aggregate glaze for embedded nonslip aggregates
• Seal plywood forms for precast concrete work

Sikafloor PU Technical Data Sheet (TDS) 
Sikafloor PU Safety Data Sheet (SDS) 

Sikafloor® - 359 AU

High-gloss solvent based, hard durable 2-part pigmented coating 

Uses:

• Carparks all levels
• Aeronautical
• Defence
• Automotives
• Garages

Sikafloor 359 AU Technical Data Sheet (TDS) 

Sikafloor® - 14 Prep 'N' Prime

Solvent-free, 1-Component Non-Porous Primer

Uses:

• Ceramic & Porcelain Tiles
• Terrazzo
• Epoxy & Polyurethane Coatings
• Sikafloor 158 W Fast Barrier (Moisture Barrier)
• Vinyl Flooring

Sikafloor 14 Prep 'N' Prime Technical Data Sheet (TDS) 
Sikafloor 14 Prep 'N'' Prime Safety Data Sheet (SDS) 

Sika® Tite BE

Heavy duty, highly flexible, water based bitumen waterproofing membrane

Uses:

• Concrete
• Sand/cement screeds
• Cement render
• Fibrous cement sheeting
• Compressed fibrous cement sheeting

Sikafloor Tite BE - Technical Data Sheet (TDS) 
Sikafloor Tite BE -  Safety Data Sheet (SDS) 

Sika® Tite 2 Part

Flexible, fast drying, cement based, two part waterproofing membrane

Uses:

• Concrete
• Sand/cement screeds
• Cement render
• Fibrous cement sheeting
• Compressed fibrous cement sheeting
• Water resistant plasterboard
• Structural grade particle board
• Marine ply and level 3 treated ply

Sikafloor Tite 2 Part - Technical Data Sheet (TDS) 
Sikafloor Tite 2 Part - Part A - Safety Data Sheet (SDS) 

Aqua Blok® 2 Part

Flexible, fast drying, cement based, two part waterproofing membrane

Uses:

• Concrete
• Sand/cement screeds
• Cement render
• Fibrous cement sheeting
• Compressed fibrous cement sheeting
• Water resistant plasterboard
• Structural grade particle board
• Marine ply and level 3 treated ply

Aqua Blok - 2 Part - Technical Data Sheet (TDS) 

Sikalastic® -1 Komponent

One-component cementitious mortar, fibre-reinforced for flexible waterproofing and concrete protection

Uses:

• Flexible waterproofing and protection of concrete structures including tanks, basins, pipes etc.
• Waterproofing of bathrooms, showers, terraces, balconies,swimming pools before the application of ceramic tiles bonded with adhesives
• Waterproofing of external wall surfaces to be backfilled in ground
• Inside waterproofing of negative water pressure of walls and floors in basements
• Flexible protection coating for reinforced concrete structures against the effects of freeze-thaw and carbon dioxide attack to improve durability

Sikalstic - 1 Komponent - Technical Data Sheet (TDS) 

Sikalstic - 1 Komponent - Safety Data Sheet (SDS) 

Sikalastic® Wet Area Waterproofing Membrane

One-component cementitious mortar, fibre-reinforced for flexible waterproofing and concrete protection

Uses:

• Concrete,Sand / cement screeds and Cement render
• Fibrous cement sheeting
• Structural particle board sheeting
• Compressed fibrous cement sheeting
• Water resistant plasterboard
• Structural plywood sheeting

Sikalstic Wet Area Waterproofing Membrane - Technical Data Sheet (TDS) 

Sikafloor®-400 N Elastic

One-component, UV resistant, highly elastic, moisture curing polyurethane waterproof membrane.

Uses:

• Exposed roof decks terraces, gutters, flashings, walls
• Balconies
• Light to medium mechanical exposure
• Heavy foot traffic
• Footbridges, stairways etc.
• Podium Decks

Sikafloor 400 N Elastic - Technical Data Sheet (TDS) 

Sikafloor 400 N Elastic - Safety Data Sheet (SDS) 

Sydney Industrial Coatings - Superclear WB

A high quality super clear top coat option

• Coverage:
  5L - Approximately 40sqm
  20L - Approximately 160sqm
• Finish:
  Gloss or Matt

SIC Superclear WB Matt - Part A - Safety Data Sheet (SDS)

SIC Superclear WB Gloss - Part A - Safety Data Sheet (SDS)

SIC Superclear Hardner - Part B - Saftey Data Sheet (SDS)

Elite Crete Systems AUS-V Aliphatic Urethane 

Extremely high solid, UV stable, high performance, two pack urethane coating

Uses:

• As protective film over any metallic floor , epoxy coating
• Seal coat over flake
• Industrial flooring
• Commercial and retail flooring

Elite Crete Systems AUS-V Aliphati Urethane - Technical Data Sheet (TDS) 
Elite Crete Systems AUS-V Aliphati Urethane - Safety Data Sheet (SDS) - PART A 
Elite Crete Systems AUS-V Aliphati Urethane - Saftey Data Sheet (SDS) - PART B

Elite Crete Systems E100 Series PT4 pretinted Epoxy 

100% solids, zero VOC, clear, self level epoxy coating

Uses:

• All general epoxy applications
• Decorative tables and projects
• Metallic floors
• Self level smooth finishes
• Flake flooring

Elite Crete Systems E100 Series PT4 Pretinted Epoxy - Technical Data Sheet (TDS) 
Elite Crete Systems E100 Series PT4 Pretinted Epoxy - Safety Data Sheet (SDS) - PART A 
Elite Crete Systems E100 Series PT4 Pretinted Epoxy - Safety Data Sheet (SDS) - PART B

Epimax 237WB Rapid Dry Low VOC Primer Sealer

EpiMax 237WB Rapid Dry Low VOC Sealer Primer is a two-component water based penetrating epoxy sealer

Uses:

• Sealer for cut and seal concrete
• Anti-slip finish with EA2 Quartz
• Dust-proofing slabs
• Rapid sealing of car parks
• Rapid dry prime for FC sheet
• Workshop floors

Epimax 237WB Rapid Dry Low VOC Primer Sealer -Safety Data Sheet (SDS) 

Uses:

• Vehicle workshops
• Retail service areas
• Restaurants
• Plant rooms
• Warehouses
• Dairies
• Correctional facilities
• Factories
• Distribution centres
• Shopping malls
• Chemical industries
• Automotive

Epimax 333WB Coloured Water Based -Safety Data Sheet (SDS) 

Uses:

• In situ concrete
• Brick, block and stone work
• Retaining walls
• Compressed sheet systems
• Pre-cast and tilt up panels
• Moisture barrier on damp walls/floors

Epimax 340 WVB White Water Based Moisure Barrier -Technical Data Sheet (TDS) 

Epimax 340 WVB White Water Based Moisure Barrier -Safety Data Sheet (SDS) 

Epimax 777UHD Clear High Performance Seal Coat System

EpiMax 777UHD High Performance Seal Coat System is a two component polyurethane coating that provides long-term protection to internal concrete.

Uses:

• Retail service areas
• Shopping malls
• Restaurant seating areas
• Television studios
• Correctional facilities
• Hotels & convention centres
• Showrooms
• Photo-decorative sealer
• Decorative cement micro topping sealer

Epimax 777UHD Clear High Performance-Technical Data Sheet (TDS) 

Epimax 777UHD Clear High Performance - Safety Data Sheet (SDS) 

Epimax 842 Fast Curing UV Stable Flooring Systems  

EpiMax 842 Fast-Curing UV Stable Flooring Systems are part of a family of two-component flooring systems built on polyaspartic chemistry. 

Uses:

• Fast return to service areas
• Residential garages
• Healthcare facilities
• Food service areas
• Laboratories
• Showrooms
• Manufacturing facilities
• Wash and change rooms
• Correctional facilities
• Commercial markets
• Decorative flooring
• Front of house flooring
• Educational facilities
• Warehousing facilities
• Port & marine use
• Commercial laundries
• Animal care centres
• Studios

EpiMax 842 Fast-Curing UV Stable - Technical Data Sheet (TDS) 

Epimax 950 Water Based Siloxane Impregnant  

EpiMax 950 Water Based Siloxane Impregnant is a low viscosity system that penetrates concrete or masonry surfaces to provide long term weatherproofing protection. 

Uses:

• Cast-in-place concrete
• Precast & prestressed concrete
• Exposed aggregate concrete
• Porous and dense brickwork
• Concrete and split-face blockwork
• Render
• Sandstone and slate
• Marble

EpiMax 950 Water Based Siloxane Impregnant - Safety Data Sheet (SDS) 

Epimax 999WB - Concrete Protective Sealer  

EpiMax 999WB Concrete Protective Sealer is a hazmat free, two component water based clear epoxy coating system specially formulated to provide ease of application, fast hardening and excellent adhesion to concrete. 

Uses:

• Parking facilities
• Retail service areas
• Garden
• Shopping malls
• Restaurants
• Correctional facilities
• Warehouses
• Self-storage units
• Plant rooms
• Factories

EpiMax 999WB - Safety Data Sheet (SDS)

A & I Coating E4110 Solvent Free Epoxy Floor Coating

Enviroset 4110 is a premium solvent free (100% Solids) epoxy which provides extra heavy duty protection for high wear industrial floors and areas where chemical spillage is anticipated.

Uses:

• Heavy manufacturing plants
• Water treatment plants
• Butcheries and Abattoirs
• Chemical Storage and battery charge areas
• Workshops and laboratories
• Shopping Centers
• Public Amenities
• Hangars
• Jails
• Wash Bays

A & I Coating E4110 - Technical Data Sheet (TDS)   

A & I Coating E4110 - Safety Data Sheet (SDS) - PART A 

A & I Coating E4110 - Safety Data Sheet (SDS) - PART B

A & I Coating V410 Kit In Light Grey

Vitreset is a premium high solids pigmented epoxy coating with enhanced flow and self-leveling properties which makes it an excellent choice for high build applications.

Uses:

• Concrete floors in factories
• Warehouses
• Jails
• Washroom floors and walls
• Shopping centre
• Places where odour during application isn’t an issue and a heavy duty non slip floor is needed.

 A & I Coating V410 Kit - Technical Data Sheet (TDS) 

A & I Coating V410 Kit - Safety Data Sheet (SDS) - PART A 

A & I Coating V410 Kit - Saftey Data Sheet (SDS) - PART B

A & I Coating V630 Polyurethane Coating

A & I Coatings VITRETHANE 630 is a solvent based two pack acrylic urethane with very good exterior durability and excellent application properties. It is quick drying and well suited to onsite application.

Uses:

• Industrial Roller Shutters
• Steelwork
• Refurbishment of weathered Colourbond fascias
• Suitable for toys and playground equipment in accordance with AS1924.1
• Truck bodies
• Machinery

 A & I Coating V630 Polyurethane - Technical Data Sheet (TDS) 

A & I Coating E2100

ENVIROSET 2100 is a two pack water borne epoxy coating with excellent film properties and surface hardness. It is a self priming and environmentally friendly coating system which is ideal as a floor coating, due to its excellent adhesion and chemical resistance. It can be tinted to an unlimited colour range.

Uses:

• Factories and warehouses
• Food and beverage industry
• Hospitals, shopping centres, schools and laboratories
• Chemical industry
• Retaining walls
• Seamless flooring
• Waterproofing concrete slabs before floor overlay
• Hangars-Skydrol Resistant.

 A & I Coating E2100 Kit - Technical Data Sheet (TDS) 

Hychem SupaFloor

Hychem SupaFloor is a multi-purpose, solventless epoxy flooring product designed to be used as either a smooth roller-applied coating or as a self-smoothing base to be broadcast with selected aggregates and sealed with a coat of itself.

Uses:

• Schools, hospitals and public buildings
• Prisons
• Retail areas
• Domestic and commercial garages
• Back of house areas
• Stock & Plant rooms
• Workshops
• Pharmaceutical Industry
• Laboratories
• Food and beverage Industry

Hychem SupaFloor Technical Data Sheet (TDS)

Hychem SupaFloor Part A Material Safety Data Sheet (MSDS)

Hychem SupaFloor Part B Material Safety Data Sheet (MSDS)

Hychem SF20FG

Hychem SF20FG is a high solids, chemical resistant, epoxy coating with built-in fine grit anti-slip additive that provides a fine non-slip surface which remains easy to clean 

Uses:

• Dairy food manufacturing
• Food and beverage production
• Margarine and oil products processing
• Abattoirs, poultry and smallgoods preparation
• Commercial kitchens and bars
• Assembly plants
• Walkways and safety markings in shopping centres and
  public facilities

Hychem SF20FG - Technical Data Sheet (TDS) 

Hychem SF20FG - Material Safety Data Sheet (MSDS) 

Hychem GP

Hychem GP Epoxy is a cost effective, low viscosity epoxy binder designed to be blended with quartz fillers

Uses:

• Grouting holding down bolts into concret
• Resurfacing worn and damaged concrete slabs
• Re-levelling concrete floors to obtain falls to drains
• Patching holes and cavities in walls, drains & floors
• Bonding new to old concrete toppings
• Laying anti-slip toppings in factories, warehouses & service areas
• As an underlay for heavy duty epoxy coatings
• Priming concrete surfaces
• As an expansion joint repair mortar

Hychem GP - Technical Data Sheet (TDS) 

Hychem GP - Material Safety Data Sheet (MSDS) 

Hychem WE70

Hychem WE70 is a clear, two-component, high solids water-based epoxy coating with very low odour and zero VOC (volatile organic compound). It offers excellent early water resistance, curing at low temperature (5°C).

Uses:

• Schools and Institutions
• Car park
• Back of house areas
• Stock and plant rooms
• Workshops

Hychem WE70 - Technical Data Sheet (TDS) 

Hychem WE70 - Material Safety Data Sheet (MSDS) 

Hychem WE90

Hychem WE90 is a pigmented, two-component, high solids water-based epoxy coating with very low odour and VOC’s (volatile organic compounds). It offers excellent early water resistance, curing at low temperature (5°C) and excellent adhesion to humid green concrete. WE90 is approximately 50% higher solids than conventional water based epoxies with comparable performance to 100% solids and solvent based coatings.

Uses:

• Schools, hospitals and public buildings
• Retail areas
• Domestic and commercial garages
• Warehouses
• Car parks
• Back of house areas
• Stock & Plant rooms
• Workshops

Hychem WE90 - Technical Data Sheet (TDS) 

Hychem PolyGlaze NY | Matt and Gloss

Hychem Polyglaze NY is a tough, flexible sealer that provides a clear non-yellowing finish to concrete and epoxy coatings. It has excellent abrasion, scratch and stain resistance

Uses:

• Ground concrete slabs
• Benchtops & stone furniture
• Floor tiles exposed to restaurant grime
• Tilers & paving slabs in walkways and public squares
• Brickwork & precast walls of public structures

Hychem PolyGlaze NY - Technical Data Sheet (TDS) 

Hychem PolyGlaze NY - Material Safety Data Sheet (MSDS) 

Hychem Hycrete PU-SL

Hychem Hycrete PU-SL(m) is a unique polyurethane concrete product which is applied as a topping on concrete floors where difficult service conditions are the norm. Hycrete PU-SL(m) is recommended for use where exposure to temperatures up to 120 °C is expected. For these conditions a minimum of 9 mm is recommended. Hycrete PU-SL(m) is also the product of choice where maximum resistance to acetic acid, lactic acid and other organic acids is required. Resistance to food acid (eg phosphoric acid) and sanitizing chemicals such as peroxyacetic acid solutions is also excellent.

Uses:

• Abattoirs and meat processing establishments
• Bakeries and snack food manufacturers
• The fish processing industry
• Breweries, wineries, fruit juice and soft drink manufacturers
• Cold storage warehouses, cool rooms and freezers
• The dairy industry including milk, butter, cheese and yoghurt products
• The edible oil and margarine industry
• The sugar industry including refineries and confectionery producer.
• The chemical and mining industry, containment bunds in mineral processing and treatment plants
• Ammonium Nitrate storage
• Areas subject to constant heavy traffic and chemicals such as tanker bays, waste transfer stations, fertilizer plants, large machinery workshops, bulk liquids transfer etc.
• Commercial and industrial kitchens in restaurants, hospitals, catering facilities, etc.
• Bars, food retailers, supermarket food preparation areas

Hychem Hycrete PU-SL - Technical Data Sheet (TDS)

Hychem Hycrete PU-SL - Material Safety Data Sheet (TDS)

Hychem Hycrete PU-TC

Hychem Hycrete PU-TC(m) is specially designed as a topcoat for Hycrete PU-SL(m) and TR flooring systems. It can also be used as a stand alone concrete coating. It has excellent chemical resistance properties.

Uses:

• Food & Beverage production facilities
• Factory production floors
• Stock & Plant rooms
• Workshops

Hychem Hycrete PU-TC - Technical Data Sheet (TDS)

Hychem Hycrete PU-TC - Part A - Material Safety Data Sheet (TDS)

Hychem Hycrete PU-TC - Part C - Material Safety Data Sheet (TDS)